Solenoid Valves

Approx. Rs 1,200 / PieceGet Latest Price

• Varied range
• Low prices
• Supreme quality

Applications:

• Textile Processing Machinery, Chemical Plants, Water Treatment, Sugar Machinery, Cement Machinery, Pumps, Irrigation, Combustion Equipment, Heat Exchanger, Air Dryer, Pollution Controls, Laundry Equipments and where dependable ON/OFF type control is required.

Approx. Rs 1,200 / PieceGet Latest Price

Jameel Trading Company is one of the authorized dealers of Low-Pressure Type Solenoid Valve in Chennai. It's popular among clients because of its long lasting life performance and customers trust on our products.

Approx. Rs 1,000 / PieceGet Latest Price

• Low maintenance
• Rigid construction
• Long functional life

Installation:

• Prepare supply and blowtube pipes to suit valve specification. Valves are mountable in any position without affecting operation, but as a general practice, to fit the valve keeping solenoid upright and above header tank is desirable. This prevents scale and water entering the valve.
• Ensure tank and pipes are free from dirt, rust or another particulate. Ensure supply air is clean and dry.
• Mount valves to inlet pipes and blow tube to valves, ensuring no excess thread sealant can enter the valve itself.
• Make electrical connections to the solenoid or connect remote pilot solenoid valve to pilot port (For remotely piloted valves only).
• Selection of the proper pilot valve orifice is important for the remote control solenoid valves as well as a length of the connecting tube, which should be kept as short as possible.
• Apply moderate pressure to the system and check for installation leaks.
• Fully pressurize the system.
• Test fire and listen for proper actuation and crisp pulse noise.

Operations:

• The pulse valve is either operated by an integral solenoid operator or a remote pilot solenoid valve. When the pilot solenoid valve is energized. the air trapped above the diaphragm is quickly exhausted through the pilot solenoid valve. causing very tact opening of the main pulse valve. When the pilot solenoid valve is de-energized air supplied through a bleed hole is trapped above the main diaphragm, causing to close the valve.

• Before conducting any maintenance activity on the system ensure that components are fully isolated from pressure and power should not be reapplied until the valve has been fully assembled. Diaphragm and pilot inspection should be conducted annually.